KW Suspension Coilover Variant 1 Inox Mercedes-Benz C-Class 10225003

Description

KW Coilover Variant 1 inox

KW Suspensions KW Coilover Variant 1 inox for Mercedes-Benz C-Class

• (W203 CL), all engines, RWD Sportcoupe, (2002 – 2004)

KW Variant 1: Sporty – Balanced. With KW factory pre-set dampening.

The KW Variant 1 Coilover System is the ideal system for customers wishing to rely on the experience of our engineers for dampening yet determine their own degree of lowering. In extensive driving tests our engineers have set the dampers for the best balance between sporty driving, comfort and safety.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 inox-line satisfies the sporty driver with its harmonic basic setup.These kits are developed for each vehicle with a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality.KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 inox-line, rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

KW Variant 1 Coilover System features:

• Optimally adjusted, sporty and comfortable dampening technology
• Inox-line stainless steel technology at no extra charge
• Individually height adjustable
• German TUEV-tested lowering range
• High-quality components for long life
• Comprehensive documentation for ease of use

Attributees

• Version: Variant 1
• Damping adjustment: None
• Adjustment FA/RA: Thread/Thread
• Material: Stainless steel
• Comprehensive documentation for ease of use

Setup – Factory pre-configured damping setup
The KW coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are Show & Shine events are interested in the KW Variant 1 inox-line.

Important Part Information:

• Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)
• When using original tires, wheel offset spacers may be required

Fitment Details: (W203 CL), all engines, RWD Sportcoupe

The KW Variant 1 Inox-line coilover kit is our entry point into our street performance lineup. Thanks to the high-quality Inox-line stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure.

The KW Variant 1 inox-line coilover allows you to experience an optimized balance of sportiness and comfort while driving. Even with a maximum vehicle load, the dampers always maintain a sporty characteristic. With KW Variant 1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar.

KW Variant 1 inox-line coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center. You are not buying a mass produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that has all developed in-house. With the KW Variant 1 inox-line coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers Made in Germany. Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coilover kits will exceed the original equipment manufacturer quality, and offer useful and innovative solutions. With an application list comprising more than 4, 600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.