Router Bits 35Pc Set 1/4‘ Shank Tungsten Carbide Tips, Aluminum Carry Storage Case Multi Piece Kit

Description

35 ROUTER BIT SET – 1/4′ CARBIDE BITS KIT Quarter Inch Shank ALUMINUM CASE This comprehensive set of Tungsten Carbide tipped bits should fulfill just about all needs. These router bits can be re-sharpened as necessary. Manufactured using sealed bearings, contained within a custom made aluminum carrying case with handle and twin clasp closures. Case dimensions: 12.75 x 9 x 2.75′ Router bits are in SAE measurements: – Core Box R1/8, R1/4′ – 90* V Grooving 1/2′ – Round Nose R1/4′ – Mortising 1/2′ – Dovetail 1/2, 1/4′ – Straight 1/8, 1/4, 3/98, 1/2, 3/4′ – Panel Pilot 1/4′ – Flush Trim 3/8×1/2′, 3/8×1′. 1/2×1/2′, 1/2×1?, 3/4×1′ – 45* Chamfer 1/2′ – Cove R1/4, 3/8′ – Rabbeting 1/4, 5/16, 3/8′ – Classical Cove R5/16′ – Mave Edge R3/16′ – Beading R1/2′ – Double Roman R3/16′, R1/4′ – Roman Ogee R5/32, 1/4,’ – Rounder Over R1/4, 3/8, 1/2′ Their equivalents in metric are: – Straight;1/2′ x 3.2mm/6.35mm/12.7mm/25.4mm/9.5mm/19mm – 90 V groove 1/2′ x R3.2mm; – Core box 1/2′ x 6.35mm; – Flush trim 1/2′ x 9.5mm (2)/1/2 x 12.7mm/1/2′ x 19mm 45 – Chamfer 1/2′ x 30mm – Roman ogee 1/2′ x R4mm/1/2 x R6.35mm Cove 1/2′ x 6.35mm/1/2 x R9.5mm – Wave edge 1/2′ x R4.76mm – Dove tail 1/2′ x 12.7mm/1/2 x 14.3mm – Mortising 1/2′ x 12.7mm – Pound nose 1/2′ x R6.35mm 90 – V groove 1/2′ x 12.7mm – Panel pilot 1/2′ x 6.35mm – Corner round 1/2′ x R6.35mm/1/2 x R9.5mm/1/2 x R12.7mm – Slot cutter 1/2′ x 6.35mm/1/2 x 7.9mm/1/2 x 9.5mm – Beading 1/2′ x R12.7mm – Classical core 1/2′ x R7.9mm – Classical 1/2′ x R4.76mm/1/2 x 6.35mm